How-to

Reduction Linocut: The Process Step by Step

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure

Gear for this job

All 6 picks compared
A set of colorful alphabet stamps and ink pads displayed in a metal box on a table
Photo: Markus Spiske on Pexels

Reduction lino printing, also called the reduction technique or a reduction linocut, is the method behind many multi-color block prints made from a single piece of lino. Picasso is the artist most often linked with it. It needs planning: the colors are decided before the first cut, the paper for the full edition is prepared in advance, and nothing can be undone. This page gives the order of work, a three-color example and the supplies to have ready.

Reduction lino printing: the definition

In a reduction print every color comes from the same block. After each color is printed, more lino is cut away, so the printing surface gets smaller with every layer. That is the reduction. What you cut before a color is the area that keeps the color already on the paper. The first cut keeps the paper white. The second cut keeps the first color, and so on. The last color prints from whatever is left.

The other route to a multi-color print is a multiple block print, with a separate block for each color. Reduction uses one piece of lino and, as Handprinted points out, can be easier to register, because there are no separate blocks to cut to match. The price is that there is no going back.

A three-color reduction, layer by layer

Read the table one row at a time. Each row has a cut and a printing, and the printing is done on every sheet of the edition before the next row starts. Three colors of ink give four tones, because the white of the paper counts.

Reduction linocut process step by step

The order is the same for any number of colors. Carving and inking work as they do for any print, so the amounts of ink and pressure are the ones in how to lino print.

  1. 1

    Plan the layers on paper: list the colors from lightest to darkest and mark which areas belong to each. 3 colors is a sensible first print.

  2. 2

    Draw the design on the block, or transfer it, in reverse. The print is a mirror image of the block.

  3. 3

    Decide the edition size and prepare all the paper now, with a few spare sheets. Set up registration that fixes the block and the paper for the whole job.

  4. 4

    Make the first cut: only the areas that stay paper white. Outline them with a V tool and clear them with a U gouge.

  5. 5

    Before a pale first color, wipe most of the transfer drawing off the block. Carbon lines can show through light ink.

  6. 6

    Roll out the lightest color thin and print it on every sheet, spares included. Wipe the block clean without soaking it.

  7. 7

    Let the layer dry, or carry on wet on wet if the ink film is thin and even. Then make the second cut: everything that should stay the first color.

  8. 8

    Print the second color on every sheet, in register. Repeat the cut-then-print cycle for each color and finish with the darkest.

  9. 9

    Dry the finished prints apart, sort out the rejects, then sign and number the edition.

Why registration is essential in a reduction print

Every color after the first has to land exactly on the layers under it. A small shift shows as a white sliver on one side of a shape and an overlap on the other. Because the block changes between layers, a sheet printed out of place cannot be corrected later.

The usual setup is a registration board. The block is stuck down with double-sided tape and stays there, even while it is carved, and two pins are taped to the board just above the top of the paper. Each sheet gets two tabs that clip onto the pins, so it returns to the same position for every color. A corner jig or a traced registration sheet also works for small editions printed by hand. All of these are explained in how to register a linocut.

Why a reduction print cannot be reprinted

By the time the print is finished, the block holds only the areas of the final color. The lino that printed the first and second colors has been carved away. Handprinted puts the point of no return early: once you reach the second layer, you cannot go back and print more of the edition. So the edition size is fixed before the first color goes down.

Plan for losses. Some sheets will be spoiled along the way by a slipped layer, a smudge or a patchy printing, and a sheet lost at color 3 cannot be replaced. Handprinted's advice is to make the edition a little larger than the number you want. Keep one or two spares as test sheets and try each new color on them before printing the good paper.

Reduction linocut supplies

A reduction print uses the normal lino printing equipment plus a few extras. Handprinted's supplies list for its tutorial starts with a single sheet of traditional gray lino.

  • Registration pins and tabs: 2 pins, and 2 tabs for every sheet of paper, spares included.
  • A flat board larger than the paper, such as a piece of plywood or the backing board of a picture frame, to hold the block and the pins.
  • Double-sided tape for the block, parcel tape for the pins and masking tape for the tabs.
  • Paper for the whole edition plus spares, prepared before you start. Thin paper suits printing by hand.
  • Ink in each planned color. Many relief inks are translucent, so each layer is tinted by the one below it.
  • Magazine pages or scrap paper to mask the board while you ink the block, so stray ink does not reach the print.
  • A small brayer (roller), optional, for inking a small area in the last layers.

Choosing colors, and printing wet on wet or dry

Colors are printed light to dark because a dark color cannot easily be covered by a lighter one. With translucent ink the lower layer shows through, so pick colors that build on each other. Handprinted's tip is to work through part of the color spectrum, such as yellow, then light green, then dark green, and to mix each new color into the one already on the slab. The final layer is often black or another very dark color.

Between layers you can wait for the ink to dry or print wet on wet. Handprinted notes that wet on wet can give slightly blobby layers or poor ink adhesion, so waiting is the safer choice for a flat finish. Water based ink dries faster but gives less working time on the slab. The drying time chart gives the range by ink type.

How to tell a layer is right before you carve again

Carving is the step that cannot be reversed, so check before every cut. Count the sheets: every sheet in the edition, spares included, must carry the current color. Judge the color on a test sheet, over the layers below it, not on the slab. Check the edges where colors meet for gaps or overlap. The print is finished when the darkest color is on every sheet and the layers sit in register.

Quick answers

Short answers on the reduction technique, from the definition to ideas for a first print and the extra supplies it needs.

  • What is the definition of reduction lino printing? A multi-color print made from one block that is carved further between colors, each color printed over the last.
  • What order do the colors go in a lino printing reduction? Lightest first, darkest last. Each cut saves the color already printed.
  • Can a linocut reduction be reprinted? No. The lino that printed the early colors is carved away, so the edition is fixed from the start.
  • What are good reduction linocut ideas for a first print? Simple shapes in 3 colors from one family, such as a leaf in yellow, light green and dark green.
  • What reduction linocut supplies are needed beyond the basics? A registration board with pins and tabs, tape, and extra paper for spoiled sheets.

What you need for this

Sources