Gear guide
Best Brayers for Linocut and Block Printing
Updated Picked from Amazon listings, not hands-on tests. How we pick
A brayer (called a roller in the UK) rolls block printing ink thin on a slab and then onto the carved block. Two things differ between the brayers sold for linocut and block printing: the width of the roller and the hardness of the rubber. Soft rubber gives a little and suits general lino work, soft blocks and blocks that are not perfectly flat; hard rubber stays on top of the surface and suits fine detail. Speedball lists its soft rubber at 40/42 durometer, and one other listing here quotes the same figure. For width, pick a roller close to the width of your block: 3 to 4 inches covers most small blocks, 6 inches suits larger ones. This guide compares six brayers by roller width, soft or hard rubber, and frame, using only what each listing states. Nothing here was tested, and where a listing leaves a detail out, the table says not stated.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
Top picks at a glance
Compare all picksClosest match for the job
Speedball Deluxe soft rubber brayer, 4 in
Roller is soft natural latex gum rubber with a precision-ground finish, rated 40/42 durometer in the spec sheet.
See price on AmazonSee it on AmazonMost for the money on paper
Lydia's Deal hard rubber brayer, 4 in
Hard rubber roller on a stainless-steel frame with a plastic handle, as the listing describes it.
See price on AmazonSee it on AmazonMost complete listing
Speedball soft rubber brayer, 3 in
3 inch roller in 40/42 durometer gum rubber, listed for linocut, woodcut and gel plate printing.
See price on AmazonSee it on Amazon
Compare the picks
- Speedball Deluxe soft rubber brayer, 4 in
- Roller width
- 4 in
- Rubber
- Soft, 40/42 durometer
- Frame
- Heavy-duty steel
- Speedball soft rubber brayer, 3 in
- Roller width
- 3 in
- Rubber
- Soft, 40/42 durometer
- Frame
- Heavy-duty steel
- QWORK soft rubber brayer, 6 in, steel frame
- Roller width
- 6 in
- Rubber
- Soft, 40/42 durometer
- Frame
- Heavy-duty steel
- Lydia's Deal hard rubber brayer, 4 in
- Roller width
- 4 in
- Rubber
- Hard rubber
- Frame
- Stainless steel
- HRLORKC hard rubber brayers, 4 in and 2.2 in
- Roller width
- 4 in and 2.2 in
- Rubber
- Hard rubber
- Frame
- Stainless steel
- Speedball hard rubber brayer, 4 in, pop-in
- Roller width
- 4 in
- Rubber
- Hard rubber
- Frame
- not stated
| Pick | Roller width | Rubber | Frame | Price | Link |
|---|---|---|---|---|---|
| Speedball Deluxe soft rubber brayer, 4 in | 4 in | Soft, 40/42 durometer | Heavy-duty steel | - | Amazon |
| Speedball soft rubber brayer, 3 in | 3 in | Soft, 40/42 durometer | Heavy-duty steel | - | Amazon |
| QWORK soft rubber brayer, 6 in, steel frame | 6 in | Soft, 40/42 durometer | Heavy-duty steel | - | Amazon |
| Lydia's Deal hard rubber brayer, 4 in | 4 in | Hard rubber | Stainless steel | - | Amazon |
| HRLORKC hard rubber brayers, 4 in and 2.2 in | 4 in and 2.2 in | Hard rubber | Stainless steel | - | Amazon |
| Speedball hard rubber brayer, 4 in, pop-in | 4 in | Hard rubber | not stated | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · Speedball
Speedball Deluxe soft rubber brayer, 4 in
See price on AmazonA 4 inch soft rubber brayer with a 40/42 durometer roller on a heavy-duty steel frame. The listing names linoleum, soft block and woodcut, which makes it the general-purpose width for small and medium blocks.
What the listing offers
- Roller is soft natural latex gum rubber with a precision-ground finish, rated 40/42 durometer in the spec sheet.
- Heavy-duty steel frame, which the product page gives as the reason for its durability.
- Listed for water-soluble and oil-based printing inks and for linoleum, soft block or woodcut.
Limits to know
- The roller is natural latex gum rubber, so it is not an option for anyone avoiding latex.
- The spec sheet gives no handle material and no cleaning instructions.
Pick 2 · Speedball
Speedball soft rubber brayer, 3 in
See price on AmazonA 3 inch soft rubber brayer from Speedball with the same 40/42 durometer gum rubber, steel frame and rust-resistant axle as the wider sizes. The narrow roller suits small blocks, stamps and cards.
What the listing offers
- 3 inch roller in 40/42 durometer gum rubber, listed for linocut, woodcut and gel plate printing.
- Heavy-duty steel frame and rust-resistant axle; the listing states Made in USA.
- Listed as compatible with water-soluble, oil-based, acrylic and fabric inks.
Limits to know
- A 3 inch roller covers small blocks only; wider blocks need overlapping passes.
- The bullets are shared with the other sizes, so nothing beyond the width is specific to this roller.
Pick 3 · QWORK
QWORK soft rubber brayer, 6 in, steel frame
See price on AmazonA 6 inch soft rubber brayer whose listing states natural latex gum rubber at 40/42 durometer and a heavy-duty steel frame. A wide soft roller from a general tool brand for larger linoleum and soft blocks.
What the listing offers
- 6 inch roller of soft natural latex gum rubber with a stated hardness of 40/42 durometer.
- Heavy-duty steel frame, as the listing describes the construction.
- Listed for linoleum, soft block and woodcut, with water-soluble and oil-based printing inks.
Limits to know
- The text calls it the Deluxe Soft Rubber Brayer, a name Speedball uses, but the brand is QWORK and no maker details are given.
- No handle material, country of origin or cleaning instructions are stated.
Pick 4 · Lydia's Deal
Lydia's Deal hard rubber brayer, 4 in
See price on AmazonA 4 inch hard rubber brayer with a stainless-steel frame and a plastic handle with finger indentations. A basic hard roller for block printing, stamping and card making.
What the listing offers
- Hard rubber roller on a stainless-steel frame with a plastic handle, as the listing describes it.
- 4 inch working width, listed for block printing, ink application, stamping and card making.
- Non-slip plastic handle with finger indentations for control over pressure and direction.
Limits to know
- No hardness figure (durometer or Shore) is given for the rubber.
- The product page also covers gluing, wallpaper and flooring, so this is a general craft roller rather than a printmaking-only tool.
Pick 5 · HRLORKC
HRLORKC hard rubber brayers, 4 in and 2.2 in
See price on AmazonA pair of hard rubber brayers, 4 inch and 2.2 inch, each with a stainless steel frame and a plastic grip. The narrow roller is there for small areas and small blocks.
What the listing offers
- Two rollers in one pack, 4 inch and 2.2 inch wide, so there is a narrow roller for small areas.
- Solid rubber roller, stainless steel frame and plastic grip handle, per the listing.
- Non-slip handle with two finger prints for adjusting power and direction; cleans with soap and warm water.
Limits to know
- Hard rubber is named in the title only, and no hardness figure is given.
- Little-known brand and a general craft roller: the product page also names stamping and scrapbooking.
Pick 6 · Speedball
Speedball hard rubber brayer, 4 in, pop-in
See price on AmazonThe 4 inch hard rubber brayer from Speedball with a pop-in roller. Hard rubber stays on top of the block surface, which is why it is the usual pick for fine detail; the listing itself says very little.
What the listing offers
- The title states a 4 inch hard rubber roller for block printing, printmaking and ink applications.
- Pop-in roller design is stated in the title of the listing.
- From Speedball, the same maker as the soft rubber brayers in this guide, so soft and hard are easy to compare.
Limits to know
- The bullets are nearly empty: no hardness figure, frame material or handle material is stated.
- Hard rubber is less forgiving than a soft roller on soft blocks and blocks that are not flat.
Read before you buy
- Block Printing Designs: Motifs, Repeat Patterns and What Prints WellHow to design for block printing: black and white thinking, line width, texture cuts, repeat layouts for fabric and paper, and classic motifs to start from.
- What Is Block Printing? The Process, the Blocks and the InksBlock printing is relief printing: carve a block, ink the raised surface, press it onto paper or fabric. Here are the types, the tools and how a print is made.
- Why Is My Lino Print Patchy or Blotchy? Causes and FixesA patchy or blotchy lino print usually means too little ink or uneven pressure. A symptom table with 7 causes and the fix for each one.
- Screen Printing Ink vs Block Printing Ink: Can You Swap Them?Screen printing ink vs block printing ink: why screen ink slides under a brayer, how to get it onto a lino block anyway, and what makers say about fabric.
- Reduction Linocut: The Process Step by StepReduction linocut step by step: one block, colors printed light to dark, the whole edition printed before each new cut. With a 3-color layer table.
More gear for the ink the block stage
Inked Block chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.