Fix a problem
What went wrong, and what to change
Start from what you see. Each note gives the likely causes in order and one change to make on the next try.
- Lino print is patchy, pale or blotchyA patchy or blotchy lino print usually means too little ink or uneven pressure. A symptom table with 7 causes and the fix for each one.Print the block
- Lino block has curled, gone hard or crackedWhy lino blocks curl, harden and crack in storage, how to flatten a curled sheet with gentle warmth and weight, and 6 rules for storing blocks flat.Dry and clean up
- Lino is too hard to cut and the tool skidsHow to soften lino for cutting: 4 gentle ways to warm a cold block, why too much heat hardens it, and how to tell old lino that is past saving.Choose the block
- Lino tool tears the block instead of cuttingFix a lino tool that tears or skids: strop every 15 to 20 minutes, hone on a fine stone, clear the inside burr, and know which blades to replace.Carve the block
- Dried ink on a lino block, brayer or slabClean dried ink off lino blocks, brayers and slabs by ink type: soap and water, soap before water, or oil. With 6 symptoms, causes and fixes in one table.Dry and clean up