Gear guide
Best Barens for Linocut and Block Printing Without a Press
Updated Picked from Amazon listings, not hands-on tests. How we pick
A baren is a disc for rubbing the back of the paper so the ink transfers from the block when you print by hand, without a press. Searchers often type it barren or baron. The usual substitute is the back of a wooden spoon, which costs nothing and puts a lot of pressure on a small spot; a baren spreads the pressure over a wider face, so large solid areas come out more even with less effort, while a spoon still helps on a patchy corner. What differs between barens: the diameter (most are about 4 inches), the face (covered in nylon, felt or flannel, smooth plastic, glass, bamboo bark or bare wood) and the handle. Hand burnishing works with thin to medium weight, smooth paper; heavy paper needs a press. This guide compares seven barens for linocut and block printing by diameter, material and handle, using only what each listing states. Nothing was tested.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
Top picks at a glance
Compare all picksClosest match for the job
Speedball block printing baren, 4 in
Measures 4 inches in diameter, as stated in the spec sheet.
See price on AmazonSee it on AmazonMost for the money on paper
Yasutomo bamboo bark baren, 3 7/8 in
Smooth, light rubbing pad made of bamboo bark, per the listing.
See price on AmazonSee it on AmazonMost complete listing
Wenses glass baren, 4 in, borosilicate
Solid, heat-resistant borosilicate glass with a polished surface, per the product page.
See price on AmazonSee it on Amazon
Compare the picks
- Speedball block printing baren, 4 in
- Diameter
- 4 in
- Material
- Nitex nylon face
- Handle
- Wooden
- Yasutomo bamboo bark baren, 3 7/8 in
- Diameter
- 3 7/8 in
- Material
- Bamboo bark
- Handle
- Bamboo bark
- Wenses glass baren, 4 in, borosilicate
- Diameter
- 4 in
- Material
- Borosilicate glass
- Handle
- Ergonomic, shaped
- Speedball Red Baron baren, 4 in, plastic face
- Diameter
- 4 in
- Material
- Smooth plastic surface
- Handle
- Wooden
- Woodzilla beech wood baren, 3.9 in (10 cm)
- Diameter
- 3.9 in (10 cm)
- Material
- Beech wood, linseed oiled
- Handle
- Shaped grip
- Falling in Art bamboo wood baren, 4 in, felt base
- Diameter
- 4 in
- Material
- Bamboo wood, felt base
- Handle
- Ergonomic
- AEROVA Block Printing Baren, 4 in
- Diameter
- -
- Material
- -
- Handle
- -
| Pick | Diameter | Material | Handle | Price | Link |
|---|---|---|---|---|---|
| Speedball block printing baren, 4 in | 4 in | Nitex nylon face | Wooden | - | Amazon |
| Yasutomo bamboo bark baren, 3 7/8 in | 3 7/8 in | Bamboo bark | Bamboo bark | - | Amazon |
| Wenses glass baren, 4 in, borosilicate | 4 in | Borosilicate glass | Ergonomic, shaped | - | Amazon |
| Speedball Red Baron baren, 4 in, plastic face | 4 in | Smooth plastic surface | Wooden | - | Amazon |
| Woodzilla beech wood baren, 3.9 in (10 cm) | 3.9 in (10 cm) | Beech wood, linseed oiled | Shaped grip | - | Amazon |
| Falling in Art bamboo wood baren, 4 in, felt base | 4 in | Bamboo wood, felt base | Ergonomic | - | Amazon |
| AEROVA Block Printing Baren, 4 in | - | - | - | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · Speedball
Speedball block printing baren, 4 in
See price on AmazonThe Speedball baren is 4 inches across with a face covered in nitex nylon and a smooth wooden handle. The listing states it is made in the USA; a fabric-faced baren for printing linocut and block prints by hand.
What the listing offers
- Measures 4 inches in diameter, as stated in the spec sheet.
- The face is covered in nitex nylon, which the spec sheet says gives a smooth glide across the paper.
- Smooth wooden handle; the manufacturer states it is made in the USA.
Limits to know
- The product page does not say what is under the nylon face or whether the cover can be replaced.
- One size only, 4 inches, and no weight is stated.
Pick 2 · Yasutomo
Yasutomo bamboo bark baren, 3 7/8 in
See price on AmazonA light rubbing pad made of bamboo bark, 3 7/8 inches across, with a bamboo bark handle. The bamboo-covered type of baren in a simple, light version for small and medium prints.
What the listing offers
- Smooth, light rubbing pad made of bamboo bark, per the listing.
- The handle is bamboo bark, which the manufacturer describes as comfortable.
- Stated diameter of 3 7/8 inches, with a flat surface for applying even pressure.
Limits to know
- The listing talks about burnishing, mono-printing and scrapbooking; linocut or block printing is not named.
- Described as light, so all the pressure has to come from the hand.
Pick 3 · Wenses
Wenses glass baren, 4 in, borosilicate
See price on AmazonA 4 inch baren in solid borosilicate glass that the listing gives as 1.7 lb. The weight does part of the pressing, and the polished surface is described as gliding with low friction.
What the listing offers
- Solid, heat-resistant borosilicate glass with a polished surface, per the product page.
- Stated weight of 1.7 lbs, which the listing ties to even pressure.
- Ergonomic handle designed to fit the contours of the hand.
Limits to know
- Glass can chip or break if dropped, unlike a wood or plastic baren.
- The product page does not say whether the handle is glass or another material.
Pick 4 · Speedball
Speedball Red Baron baren, 4 in, plastic face
See price on AmazonA 4 inch baren from Speedball with a smooth plastic surface and a wooden handle, per the title. A plain, hard-faced disc for burnishing linocut and block prints by hand.
What the listing offers
- The title states a 4 inch hand printing tool for block printing and printmaking.
- Smooth plastic surface, as stated in the title, rather than a fabric cover.
- Wooden handle, as stated in the title of the listing.
Limits to know
- The bullets are nearly empty, so everything known about it comes from the title.
- No padding or cover is mentioned for the plastic face, and no weight is stated.
Pick 5 · Speedball
Woodzilla beech wood baren, 3.9 in (10 cm)
See price on AmazonA 3.9 inch (10 cm) baren made of beech wood and conditioned with one layer of linseed oil. The spherical surface is meant to slide over the paper, and the shaped grip serves as the handle.
What the listing offers
- Made of sustainably sourced beech wood, per the listing.
- Conditioned with a single layer of linseed oil, so the product page says it is ready to use out of the box.
- Listed for woodcut, etching and linoleum printing, with a shaped grip for holding.
Limits to know
- The bullets describe both a flat surface and a spherical surface, so the shape of the face is not clear from the text.
- Bare wood with no pad or cover, and no weight is stated.
Pick 6 · Falling in Art
Falling in Art bamboo wood baren, 4 in, felt base
See price on AmazonA 4 inch baren made from bamboo wood with a felt-covered base and a handle shaped to fit the palm. A soft-faced option that the listing aims at small or intricate prints and cards.
What the listing offers
- Made from bamboo wood, planed and polished to a flat, level surface, per the listing.
- Felt-covered base, which the spec sheet says spreads pressure evenly.
- Ergonomic handle described as fitting in the palm.
Limits to know
- The manufacturer does not say whether the felt can be replaced when it wears or picks up ink.
- Described as compact and suited to small or intricate prints rather than large blocks.
Pick 7 · AEROVA
AEROVA Block Printing Baren, 4 in
See price on AmazonA 4 inch plastic baren with an ergonomic handle and a replaceable flannelette pad, a low-cost hand-pressure tool for linocut and block prints without a press.
What the listing offers
- The listing gives a 4 inch diameter, a roomy face for pressing the back of a block print evenly in a few passes.
- Ergonomic handle is described as helping you apply even pressure by hand when printing without a press.
- Made of plastic with a replaceable flannelette pad, so the pad can be swapped when it wears, per the spec sheet.
Limits to know
- The body is plastic rather than bamboo, wood or glass, so it has a lighter feel than the traditional barens in this guide.
- The spec sheet gives few details on the pad material or on paper types, so heavy pressure on thick stock is not described.
Read before you buy
- Why Is My Lino Print Patchy or Blotchy? Causes and FixesA patchy or blotchy lino print usually means too little ink or uneven pressure. A symptom table with 7 causes and the fix for each one.
- How to Make Linocut Christmas Cards: Card Stock, Ink and DryingMake linocut Christmas cards at home: block sizes for A2, A6 and A7 envelopes, card that prints by hand, a simple jig and drying time before mailing.
- How to Print a Linocut Without a PressPrint a linocut by hand with a wooden spoon, baren or clean brayer. Method table, paper of 40 to 160 gsm and 7 steps to a solid, even print.
- How to Register a Linocut: 4 Ways to Line Up ColorsFour ways to register a multi-color linocut: registration sheet, corner jig, pins and tabs, and key block offset. What each needs, by hand or press.
- How to Lino Print: Block Printing Step by StepHow to lino print in 10 steps: reverse and transfer the design, carve, roll out a thin film of ink, print by hand with a baren or spoon, dry and clean up.
More gear for the print the block stage
Inked Block chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.