# Best Wood Carving Tools for Woodcut Printing

Source: https://inkedblock.com/best/best-wood-carving-tools-for-woodcut-printing
Publisher: Inked Block. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://inkedblock.com/how-we-pick

Lino cutters are made for soft linoleum and rubber. A woodcut block asks for more: plank wood or plywood resists the blade, so the tool needs a stiffer shank, a keener edge and a handle that lets you push with your palm. Most woodcut printmakers work with palm gouges, V-parting tools and flat chisels, and the choice comes down to the shapes in the set, the width of each blade, the steel and whether the maker sells the set for carving blocks or for whittling spoons. This guide compares seven sets from Flexcut, Pfeil, BeaverCraft, Kakuri and HACHIEMON by what each listing states: number of tools, blade shapes and sizes, steel, handle and origin. For soft lino and rubber blocks, see the lino cutting tool sets guides instead. Nothing here was tested: it is a comparison of the listings.

## Picks

### 1. Flexcut Carving Tools Deluxe Palm Gouge Set FR405, Wood Crving Kit, Razor-Sharp 1095 High Carbon Steel Blade, Made in the USA

Flexcut deluxe palm gouge set FR405 with nine tools: seven gouges in different sweeps and two 70 degree V-tools, in a lidded box. The broadest Flexcut palm kit in this guide.

What the listing offers:
- Seven gouges plus two V-tools, so one box covers lines, textures and clearing.
- Two V-tool widths, 1/4 in and 3/8 in, for outlines and hatching on the block.
- 1095 high carbon steel blades and ash handles in a lidded storage box.

Limits to know:
- Priced well above the five-tool Flexcut set, which is a lot to spend if you only carve occasionally.
- Palm handles are short, so they give control rather than leverage on hard woods.

### 2. PFEIL "Swiss Made" Palm Set C, 6 Pieces

Pfeil Swiss Made Palm Set C with six tools: V-parting tools, a veiner and three gouges, hand sharpened, with half round hardwood handles. Designed for wood block carving.

What the listing offers:
- Described as designed for wood block carving, which matches the woodcut job directly.
- Two V-parting tools, a veiner and three gouges, with sizes listed in the bullets from 0.5 mm to 7 mm.
- Hand-sharpened Swiss made tools in a short 4 3/4 in length for delicate, intricate work.

Limits to know:
- The most expensive set here, so it is a purchase for someone already committed to woodcut.
- Small sizes only: the widest blade is 7 mm, so large background areas take longer to clear.

### 3. KAKURI Professional Japanese Wood Carving Tool Set 5-Piece - Made in Japan | Wood Carving Knife Kit for Woodblock Printing, Woodcut Printmaking, Linoleum Carving - Japanese Blue Paper Steel #2 Blades

Kakuri professional Japanese five-piece set for woodblock printing: 6 mm flat chisel, 9 mm skew chisel, 3 mm and 9 mm U gouges and a 6 mm V gouge, Blue Paper Steel #2 blades.

What the listing offers:
- Aogami Blue Paper Steel #2 blades with a stated hardness over HRC60, a hard steel that holds an edge.
- Cypress wood handles, and the listing says the blade can keep being used after repeated sharpening.
- Flat chisel and skew chisel are included, which many palm gouge sets leave out.

Limits to know:
- Blue paper steel needs proper sharpening and careful storage, which new carvers may find fussy.
- The most expensive set here after Flexcut FR405 and Pfeil, so it is a stretch for a first kit.

### 4. Flexcut Wood Carving Tools Beginners Palm Set of 5, FR310 Ash Hardwood Handles,1095 High Carbon Steel Blades, Box Included | Made in the U.S.A.

Flexcut palm set of five with ash hardwood handles, 1095 high carbon steel blades and a wooden tool box, made in the USA. A compact first set of palm tools for carving printing blocks.

What the listing offers:
- Five palm tools in a wooden box, so a small woodcut kit is ready to carve and store without buying anything else.
- 1095 high carbon steel blades, a steel that takes a keen edge and can be honed back with a strop.
- Ash hardwood handles shaped for the palm, which suits pushing a cut across a block with control.

Limits to know:
- The listing does not give blade widths, so check the shapes before counting on it for broad clearing work.
- Five tools cover the basics, but anyone who wants several gouge sweeps will outgrow it.

### 5. HACHIEMON Japanese Wood Carving Tools 5PCS Set for Wood Working - Sharpness and Durability - Made in Japan

HACHIEMON five-piece Japanese wood carving set made in Japan: single bevel skew chisel and flat chisel at 9 mm, a 6 mm V-parting tool and two gouges at 4 mm and 9 mm.

What the listing offers:
- Listed as a layered blade, iron on top with hard steel below, which the listing says makes it easy to maintain.
- Covers a skew chisel, a flat chisel, a V-tool and two gouges for a basic woodcut kit at a low price.
- Made in Japan with blade sizes spelled out on the product page.

Limits to know:
- Single bevel Japanese chisels cut differently from Western palm gouges, so there is a learning curve.
- The manufacturer says little about handles or a case, so plan on storing the tools yourself.

### 6. BeaverCraft Wood Carving Gouges Kit SC05 - Wood Carving Chisels Set with Palm Gouge & Flat Straight Chisel, Rounded Short Bent, V-chisels - Whittling Knives, Tools for Beginners and Profi Carvers

BeaverCraft SC05, a six-piece palm gouge and chisel set with ashwood handles: palm gouge, flat chisel, rounded short bent, and V-chisels. Made in Ukraine.

What the listing offers:
- Mixes gouges, a flat chisel and V-chisels, enough shapes to outline a design and clear around it.
- Lightweight ashwood handles shaped for the palm, as the listing describes.
- Lower price than the Flexcut and Pfeil palm sets while still giving six tools.

Limits to know:
- The product page says these are palm tools only and should not be used with a mallet or hammer.
- Sold with whittling and general carving in mind rather than printmaking, so blade sizes are less clear.

### 7. Flexcut Carving Tools, Wide-Format Palm Gouges, Ash Hardwood Handles and Carbon Steel Blades, Set of 4 (FR404)

Flexcut FR404, four wide-format palm gouges with ash handles and carbon steel blades in a wooden box. Built for clearing larger areas of a block faster than narrow tools.

What the listing offers:
- Four large palm gouges, a good match for clearing the background areas of a woodcut quickly.
- Razor-sharp 1095 high carbon steel blades, stated as ready to use out of the package.
- Comes in a wooden tool box, so the wide gouges stay protected between sessions.

Limits to know:
- Gouges only: the listing shows no V-tool or flat chisel, so line work needs a second set.
- Wide blades are less suited to fine detail, so this works best as an add-on to a small-tool set.

As an Amazon Associate I earn from qualifying purchases.